


 |
|
Below we have listed some of our references. This
is not a complete list, but it should give you an idea of the
projects we have been involved in.
 | Development of CCD based imaging platform
for parts inspection, hardware platform and lowlevel software
 | Based on Texas Instrument TMS320C6211 DSP |
 | Fujitsu 16 bit controller with CAN bus |
 | Altera FLEX10K FPGA preprocessor
|
|
 | Development of Active Noise Cancellation
unit for use in aeroplanes, hardware and software
 | Based on Texas Instruments TMS320C6211 DSP |
 | 4 MByte SDRAM, 2 MByte FLASH |
 | High speed Stereo CODEC |
 | Voice recorder, talking stop watch,
audio enhancing functions, display module
|
|
 | Development of 10/100 MBit Ethernet card for
Texas Instruments, Houston
 | Board is included in Texas Instruments
Networking Development Kit |
 | Complete support with TCP/IP stack, running
on C6x11 DSPs
|
|
 | Development of GSM 900 and GSM 1800
testequipment
 | AM modulation unit for testing Nokia mobile
phones |
 | Balanced mixer technology, amplifier, GaAs
highpower switches |
 | Interfaces directly to IFR mobile phone
testers
|
|
 | Development of Imaging platform for Digital
cameras
 | PCI board, sustained bandwidth of 100
MByte/second to host PC |
 | Dual TMS320C6x01 DSPs, 32 MByte SDRAM, 4
MByte FLASH |
 | Dual highspeed daughtercard interface
sites, sustained 240 MBytes/Second transfer rate on both
sites simultaneously |
 | Camera interface realized in two Altera
FLEX10K100 FPGAs |
 | Upto 16 boards in one single PC (passive
backplane)
|
|
 | Development of Logic IO's own line of Remote
Telemetry and Control Unit (RTCU)
 | Complete product development, both hardware
and software |
 | Based on 16 bit controllers from Fujitsu |
 | Based on GSM/GPRS/DECT/UHF radio technology |
 | Development of high performance realtime
kernel |
 | Advanced compiler, superset of IEC1131
programming language |
 | Full featured Integrated Development
Environment, complete simulator, project management |
 | More info at
www.logicio.com |
|
For further references, please contact
us !
|
|