MX Series / Automotive & industrial telemetry

RTCU MX2 turbo LTE

Vehicle interfaces. Programmable telemetry.

A programmable NX32 telemetry and telematics device combining LTE Cat. 1, GNSS, CAN and physical I/O for automotive and industrial applications.

EMEA LTE Cat. 1CAN & GNSSNX32

Technical documents Request a quote for this model

Part of the RTCU M2M Platform

Interfaces / Application logic

Connect the equipment.
Develop the application.

A programmable NX32 telemetry and telematics device combining LTE Cat. 1, GNSS, CAN and physical I/O for automotive and industrial applications.

Connect to vehicle equipment

CAN 2.0B, dual RS232, RS485 and 1-Wire provide wired interfaces alongside digital and analog inputs.

Choose the positioning configuration

Choose standard multi-constellation GNSS or the GNSS/UDR variant. Untethered Dead Reckoning is specific to the UDR version.

Build on NX32

Run application logic on the NX32 execution model. This is a distinct architecture from the Linux-based NX32L devices in the NX and LX families.

Processing & storage
Architecture	NX32 execution model
Main processor	32-bit ST ARM7
Execution RAM	2112 KB
Firmware/application flash	4532 KB
Persistent data flash	7.5 MB
Internal flash drive	8 MB FAT32
Removable storage	SD card, up to 32 GB

Communication & positioning
Cellular	EMEA LTE Cat. 1; see the technical manual for supported radio bands
Positioning	Standard GNSS or GNSS with Untethered Dead Reckoning (UDR), depending on model
Standard GNSS constellations	GPS, GLONASS, Galileo and QZSS
CAN	Full CAN 2.0B
Serial interfaces	2 × RS232; 1 × RS485
Peripheral bus	1-Wire
Movement sensor	3-axis accelerometer

I/O & expansion
Digital inputs	5, including the ignition input
Digital outputs	4 high-side solid-state outputs
Analog inputs	2; 0–10 VDC, up to 12-bit resolution (10-bit default)
Expansion	Standard Modbus I/O modules

Power & installation
Supply voltage	8–36 VDC
Backup battery	Onboard 2 Ah nominal Li-Ion
Backup behavior	Power-down on external supply loss by default; configurable. Digital outputs are disabled after power failure.
Enclosure	Aluminium and plastic
Dimensions	W 97 × H 35 × D 132 mm, excluding antenna connectors
Operating temperature	−35 to +60 °C; battery charging has separate limits

Plan your setup

Models & ordering

Choose the configuration for your installation and include the required region, interfaces and quantity in your enquiry.

RT-MX2T-LTELTE Cat.1 EMEA with GNSSRequest a quote for RT-MX2T-LTE
RT-MX2T-LTE-ULTE Cat.1 EMEA with GNSS + UDRRequest a quote for RT-MX2T-LTE-U

Request a quote for this model

Minimum local setup

A Windows PC with RTCU M2M Studio.
The device, its documented power source and model-specific programming cable. Install the driver required for that connection.
Antennas for the radio interfaces you use; a SIM and service subscription if the application uses cellular connectivity.

Remote M2M Studio access adds network connectivity and the RTCU Communication Hub. The Deployment Server is optional for managed remote updates.

Local and remote setup guide Cables, antennas & accessories Software & firmware license (PDF)

LX2 pro / MX2 turbo LTE comparison (PDF)

Product resources

From evaluation
to installation.

Download the manufacturer documents. Match the exact model and document version to your installation.

Development tools & resources

MX2 turbo LTE data sheetProduct overview · V1.00 · PDF MX2 turbo LTE technical manualInstallation & interfaces · V1.00 · PDF

From requirements to reality

Does MX2 turbo LTE fit your application?

Discuss your interfaces, installation and development requirements with our team.