RTCU Programming Tool

Released: April 6, 2026

Enhancements:

• Updated Communication Engine: Now utilizes the latest RTCU CSP V4.60 for enhanced stability and communication performance.

• Expanded Hardware Support: Added comprehensive support for the newest generation of RTCU devices.

Fixed Bugs:

• SMS Display: Resolved an intermittent issue where certain incoming SMS messages were not correctly displayed in the tool's interface.

Released: January 7, 2025

Enhancements:

•  Support for RTCU IEX Insight! built projects.

•  Support for the latest RTCU devices.

Released: July 24, 2023

Enhancements:

•  Support for the new RTCU LX2 pro.

•  Updated with the latest features and support offered by the RTCU CSP V4.54.

Released: April 18, 2022

Enhancements:

•  Support for the latest RTCU devices.

•  Updated with the latest features and support offered by the RTCU CSP V4.50.

Released: September 25, 2021

Enhancements:

•  Support for the latest RTCU LX4 and RTCU LX5 devices.

Bugs, which have been fixed in this release:

•  The Communication port selected was not saved and therefore only USB could be used.

Released: October 3, 2020

Enhancements:

•  Full support for the RTCU Communication Hub.

•  Dialog to setup all network interfaces (cellular, LAN, WLAN, AP).

•  Enhanced installation engine.

Released: November 10, 2019

Enhancements:

•  Support for the latest RTCU NX32L devices.

•  Improved SMS dialog with a functionality similar to the RTCU IDE.

Released: June 2, 2019

Enhancements:

•  Support for the NX32L compilation mode.
   

Released: March 3, 2019

Enhancements:

•  Support for EIS3 compiled applications.

•  Full support for the RTCU NX-400.

Released: December 3, 2017

General Enhancements:

•  Enhanced support for the new RTCU NX-400.

•  File management window was added.

Released: September 3, 2017

General Enhancements:

•  Support for the new RTCU NX-400.

Released: February 28, 2016

General Enhancements:

•  Support projects compiled with Large String Support (LSS).

•  Support for the new RTCU DX4i pro mk2.

•  Uses the latest RTCU CSP V2.40.

•  + other minor enhancements.

Released: September 20, 2015

General Enhancements:

•  Full support for the new RTCU AX9 turbo and AX9 encore.

•  New feature to se the GSM PIN code in the device.

•  LPS (Large Packet Support) when using the RTCU Gateway.

•  Uses the latest RTCU CSP V2.30

•  + other minor enhancements.

Released: September 29, 2014.

General Enhancements:

•  Support for the new RTCU DX4i pro, DX4i warp, CX1 warp series, AX9i pro and AX9i eco.

•  Uses the latest RTCU CSP V2.10

•  + other minor enhancements.

Released: June 23, 2014.

This major release supports the NX32 Execution Architecture as used by the new RTCU MX2 turbo.
The complete list is as follows:

General Enhancements:

•  Support for the new RTCU MX2 turbo.

•  NX32 Execution Architecture with RTCU Project Container support.

•  Support for the new High-Speed USB Programming Cable.

•  Uses the latest RTCU CSP V2.00

•  + other minor enhancements.

Released: April 28, 2013.

The latest release of the RTCU Programming Tool V6.60 includes the following enhancements:

Enhancements:

•  Support for the RTCU V3 Memory Architecture as introduced in X32 firmware V3.00.

•  Windows 8 compatibility with certified digital signature.

•  RTCU USB 2.00 drivers released for Windows 8 compatibility. Must be installed separately.

•  Uses the latest RTCU CSP V1.50.

•  + other minor enhancements.

Released: November 24, 2012.

The latest release of the RTCU Programming Tool V6.50 includes the following enhancements:

Enhancements:

•  Support for the SX1 series.

•  On-demand option support.

•  Improved communication error handling.

•  Uses the latest RTCU CSP V1.44.

•  + other minor enhancements.

Released: December 14, 2011.

The latest release of the RTCU Programming Tool V6.40 includes the following enhancements:

Enhancements:

•  Support for the new CX1 series including option key activation.

•  Uses the latest RTCU CSP V1.40.

•  + other minor enhancements.

Released: September 27, 2010.

The latest release of the RTCU Programming Tool V6.31 includes the following enhancements:

Enhancements:

•  Improved file-selection filter when choosing firmware/application.

•  Logon sequence changed to allow a 'clear password' key to be applied.

•  Infrequently 'incompatible instruction set' message fixed.

•  Uses the latest RTCU CSP V1.32.

•  + other minor enhancements.

Released: May 24, 2010.

The latest release of the RTCU Programming Tool V6.30 includes the following enhancements:

Enhancements:

•  Support for the new RTCU AX9 Series!

•  RTCU AX9 Series USB programming port support.

•  Memory vector increased from 1024 to 4096 elements as found in X32 firmware V2.10.

•  Enhanced bandwidth over CSD when using a GSM modem.

•  Certain RS232 ports not found on some PC-installations.

•  Uses the latest RTCU CSP V1.30.